Radwin 5000 HPMP User Manual page 93

Configuring the Sector out of the Box - IP Addresses
2. Click Next:
Enter the Sector ID, Name and Location. All fields are mandatory. Here are entries in
accordance with
About the Sector ID:
Any unregistered HSU will establish a link with the first HBS it detects and inherit the
Sector ID from the HBS. As soon as the HSU is registered for service with the HBS,
the HSU's inherited Sector ID can no longer be changed while linked: It is "locked"
into the HBS. This mechanism prevents an HSU close to a sector boundary from
"drifting" between HBSs for adjacent sectors.
Notice that the Sector ID is split into two parts as shown in the previous figure. For a
network consisting of sectors with fixed HSUs only, the split is immaterial. If the sec-
tor is part of a network having non-fixed HSUs, then each Sector ID for each partici-
pating sector should have the same four character Network ID. The remaining part is
RADWIN 5000 HPMP User Manual
Table 5-2.
Release 3.3.30
Chapter 5
5-9