Software Update for GSUs
display tx_phase
display gpsinfo
The last one display gpsinfo, is the most interesting:
admin@10.107.2.20-> display gpsinfo
Current GPS time
Current GPS latitude
Current GPS N\S Indicator
Current GPS longitude
Current GPS E\W Indicator
Current GPS number of satellites 09
Current GPS altitude
Command "display gpsinfo" finished OK.
The three additional set commands are
set rfp <index> (2-6) [Must be 6 for RFP E]
set ratio <ratio> [Leave as is]
set tx_phase <mode:1=normal,2=shifted> [See above]
Software Update for GSUs
All GSUs in a distributed site can be updated simultaneously. Use an IP list as described in
Chapter
12.
RADWIN 5000 HPMP User Manual
102941.000
51.500000
N
0.000000
E
84.0
Release 3.3.30
Chapter 11
11-17