Radwin 5000 HPMP User Manual page 94

Configuring the Sector out of the Box - IP Addresses
ignored when an HBS establishes a link with a non-fixed HSU. This feature enables
non-fixed HSUs to establish a link with any HBS in the network.
The Sector ID is split into a four character Network ID (EBGX) and the remaining
part (20561334).
For fixed HSUs you may ignore the split. For non-fixed HSUs, the use of the split Sec-
tor ID is explained on
Choose your Sector ID it carefully particularly if you are using collocated HBSs for
extra coverage. The Sector Name and Location are convenience items but should be
chosen to ensure that the sector is documented and easily identifiable in your RF
planning.
3. Open the Coordinates dialog to set the location of the HBS in accordance with
Table 5-2:
4. The Link Password may also be changed by clicking Change:
RADWIN 5000 HPMP User Manual
page 7-4.
Release 3.3.30
Chapter 5
5-10