Radwin 5000 HPMP User Manual page 348

Point to multipoint broadband wireless
Hide thumbs Also See for 5000 HPMP:
Table of Contents

Advertisement

Trap Parameters
Trap Parameters
Table C-3: MIB Traps (Sheet 1 of 6)
Name
trunkStateChanged
linkUp
linkDown
detectIDU
disconnectIDU
mismatchIDU
openedServices
closedServices
incompatibleODUs
incompatibleIDUs
incompatibleOduIdu
probingChannel
radarDetected
transmittingOnChannel
scanningChannels
incompatiblePartner
timeClockSet
configurationChanged
RADWIN 5000 HPMP User Manual
ID
Severity
Description
1
normal
Indicates a change in the state of one of the TDM trunks. Raised by both
sides of the link. Contains 3 parameters: 1 - Description: TDM Interface
%n - %x 2 - %n: Is the trunk number 3 - %x: Is the alarm type and can
be one of the following: Normal AIS LOS Loopback
2
normal
Indicates that the radio link is up. Contains a single parameter which is
its description: 1 - Description: Radio Link - Sync on channel %n GHz.
%n Is the channel frequency in GHz.
3
critical
Indicates that the radio link is down. Contains a single parameter which
is its description: 1 - Description: Radio Link - Out of Sync. The reason
is: %s. %s Is the reason.
4
normal
Indicates that the IDU was detected. Raised by both sides of the link.
Contains a single parameter which is its description: 1 - Description:
IDU of Type %s was Detected. %s Is the type of the IDU.
5
major
Indicates that the IDU was disconnected. Raised by both sides of the
link. Contains a single parameter which is its description: 1 -
Description: IDU Disconnected.
6
major
Indicates a mismatch between the IDUs. Raised by the master only.
Contains a single parameter which is its description: 1 - Description:
IDUs Mismatch: One Side is %s and the Other is %s. %s Is the type of
the IDU.
7
normal
Indicates that services were opened. Raised by the master only.
Contains 3 parameters: 1 - Description: %n2 out of %n1 Requested
TDM Trunks have been Opened 2 - %n1: Is the requested number of
TDM truncks 3 - %n2: Is the actual number of TDM trunks that were
opened
8
normal
Indicates that services were closed. Raised by the master only.
Contains a single parameter which is its description: 1 - Description:
TDM Service has been closed. The reason is: %s. %s Is the reason.
9
critical
Indicates that the ODUs are incompatible. Contains a single parameter
which is its description: 1 - Description: Incompatible ODUs.
10
major
Indicates that the IDUs are incompatible. Contains a single parameter
which is its description: 1 - Description: Incompatible IDUs.
11
major
Indicates that the ODU and IDU are incompatible. Contains a single
parameter which is its description: 1 - Description: The IDU could not be
loaded. The reason is: %s. %s Is the incompatibility type.
12
normal
Indicates that the ODU is monitoring radar activity. Contains a single
parameter which is its description: 1 - Description: Monitoring for radar
activity on channel %n GHz. %n is the channel frequency in GHz.
13
normal
Indicates that radar activity was detected. Contains a single parameter
which is its description: 1 - Description: Radar activity was detected in
%s on channel %n GHz. %s Is the site name. %n Is the channel
frequency in GHz.
14
normal
Indicates that the ODU is transmitting on channel. Contains a single
parameter which is its description: 1 - Description: Transmitting on
channel %n GHz. %n Is the channel frequency in GHz.
15
normal
Indicates that the ODU is scanning channels. Contains a single
parameter which is its description: 1 - Description: Channel scanning in
progress.
16
critical
Indicates that configuration problem was detected and that link
installation is required in order to fix it. Contains a single parameter
which is its description: 1 - Description: Configuration problem detected.
Link installation required.
17
normal
Indicates that the ODU time clock was set. Contains a single parameter
which is its description: 1 - Description: The time was set to: %p. %p Is
the date and time.
18
normal
Indicates that the ODU recovered from an error but there are
configuration changes. Contains two parameters: 1 - Description:
Configuration changed. Error code is: %n. 2 - %n number.
Release 3.3.30
Appendix C
C-30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents