Considerations For Changing Antenna Parameters - Radwin 5000 HPMP User Manual

Considerations for Changing Antenna Parameters

Table E-1: MIMO - Diversity settings (Continued)
Number of
Antennas
Mode
Site A Site B
2 1
1 2
1 1
Site A and B may be HBS or HSU.
The rates used by RADWIN 5000 HPMP are shown in
Table E-2: RADWIN 5000 HPMP Air rates
Antenna Modulation
Single BPSK
Single QPSK
Single QPSK
Single 16QAM
Single 16QAM
Single 64QAM
Single 64QAM
Single 64QAM
Dual BPSK
Dual QPSK
Dual QPSK
Dual 16QAM
Dual 16QAM
Dual 64QAM
Dual 64QAM
Dual 64QAM
Considerations for Changing Antenna Parameters
Let:
max Available Tx Power denote the maximum Tx Power practically available from an ODU.
(It appears as Tx Power per Radio.)
maxRegEIRP denote the maximum EIRP available by regulation. It will be determined by
three factors:
• per band/regulation
• per channel bandwidth
• antenna gain
RADWIN 5000 HPMP User Manual
Max Full
Duplex
Capacity
25 Mbps
25 Mbps
25 Mbps
Air-Rate
FEC
[Mbps]
1/2 6.5
1/2 13
3/4 19.5
1/2 26
3/4 39
2/3 52
3/4 58.5
5/6 65
1/2 13
1/2 26
3/4 39
1/2 52
3/4 78
2/3 104
3/4 117
5/6 130
Release 3.3.30
Table E-2 below:
Appendix E
E-3