Chapter 6 Managing The Sector; Scope Of This Chapter; Configuring A Hbs - Radwin 5000 HPMP User Manual

Scope of this Chapter

This chapter deals with managing the sector from the HBS. It covers HBS Configuration and
HSU Configuration from the HBS. HSU direct or over-the-air configuration is a little different
and is covered in Chapter
A Configuration window is available for both the HBS and the HSUs to change setting without
necessarily dropping service. Nevertheless care must be exercised when changing them. By
way of example, changing antenna parameters for a HSU results in a HSU reset. It is neces-
sary however to have this function in the Configuration window since it is required to initially
set up the unit.
The HBS itself may be configured over-the-air: A scenario for this is where the sector is back-
hauled by on of the HSUs. There are no significant differences between the two methods,
however some care is required. If for example, you deactivate the HBS over-the-air, you will
lock yourself out of the sector.
Running Spectrum View from the HBS manager over-the-air, will lock you out for the duration
of the Spectrum View timeout period.

Configuring a HBS

Configuration Menu Buttons
Open the Configuration window.
The Backup and Restore buttons provide for backup and restore of the HBS software.
A backup (full or configuration) may be restored to another HBS provided
that the product IDs and revision levels of the source and target HBSs are
identical.
Note
The Refresh button restores the current window to its previous state abandoning any
changes you made, provided that you did not click Apply or OK.
RADWIN 5000 HPMP User Manual
Managing the Sector
7.
Release 3.3.30
Chapter 6
6-1