Radwin 5000 HPMP User Manual page 75

HBS Main Window - HSUs Panel
Figure 4-25: HSU status boxes - detail, indicating problems
If you mouse-over the colored RSS area, you will receive a tool tip telling you that RSS for
Radio 1 is higher than for Radio 2, or something similar. The color codes have the following
meanings:
• Normal white/green together with a consistent RSS imbalance may be caused by dif-
ferent TX Power settings at each site. There is no warning indicator but it may be eas-
ily corrected using Configure| Tx & Antenna or by rerunning the Configuration
wizard.
• A yellow warning color will be displayed for an RSS difference of more than 8 dBm
between the two polarizations on the same site (the RSS display is the combination of
both polarizations on this site)
• A red warning color indicates an RSS difference of more than 16 dBm between the
two polarizations on the same site
The latter two cases are usually the result of a physical problem at the indicated site. Proba-
ble causes are:
• Interference
• Antenna polarity problem
• ODU malfunction
This is a normal situation:
Figure 4-26: HSU status boxes - detail, normal operation. Left: fixed HSU Right: nomadic HSU
The arrow on the top right hand corner can be used to minimize or restore full detail. Here is
the HSU status box of
a large sector with a small display.
RADWIN 5000 HPMP User Manual
Figure 4-20 minimized:
Release 3.3.30
Chapter 4
This device is useful for
4-25