Radwin 5000 HPMP User Manual page 222

Configuring the GSU
The sector works correctly.
3. Move the slider a little to the right as follows:
The HBS stops transmitting.
Note
3. Choosing the Transmission Phase
Chose the Transmission Phase in accordance with considerations in step 1 above. If you
choose Shifted Phase then the Asymmetric Ratio selector is disabled.
RADWIN 5000 HPMP User Manual
• Beyond the right most check mark on the green bar, no collocated
client link will operate at 5MHz CBW. A similar procedure may be
used for 10MHz CBW.
• You may need to repeat this procedure to establish the precise limit
for your sector.
• We do not offer precise values for the limit since it will be affected by
other collocated HBSs or ODUs.
Release 3.3.30
Chapter 11
11-10