Radwin 5000 HPMP User Manual page 322

Point to multipoint broadband wireless
Hide thumbs Also See for 5000 HPMP:
Table of Contents

Advertisement

Supported Variables from the RFC 1213 MIB
Table C-1: Supported RFC 1213 Variables (Sheet 2 of 2)
Name
ifSpeed
ifPhysAddress
ifAdminStatus
ifOperStatus
ifInOctets
ifInUcastPkts
ifInNUcastPkts
ifInErrors
ifOutOctets
ifOutUcastPkts
ifOutNUcastPkts
RADWIN 5000 HPMP User Manual
OID
.1.3.6.1.2.1.2.2.1.5
.1.3.6.1.2.1.2.2.1.6
.1.3.6.1.2.1.2.2.1.7
.1.3.6.1.2.1.2.2.1.8
.1.3.6.1.2.1.2.2.1.10.x
.1.3.6.1.2.1.2.2.1.11.x
.1.3.6.1.2.1.2.2.1.12.x
.1.3.6.1.2.1.2.2.1.14.x
.1.3.6.1.2.1.2.2.1.16.x
.1.3.6.1.2.1.2.2.1.17.x
.1.3.6.1.2.1.2.2.1.18.x
a. x is the interface ID
Type
Gauge
Phys-Address
Integer
Integer
Counter
Counter
Counter
Counter
Counter
Counter
Counter
Release 3.3.30
Appendix C
Description
RO
An estimate of the interface's current bandwidth in
bits per second.For interfaces which do not vary in
bandwidth or for those where no accurate
estimation can be made, this object should ontain
the nominal bandwidth.
RO
The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length.
RW The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed.
RO
The current operational state of the interface. The
testing(3) state indicates that no operational
packets can be passed.
RO
The total number of octets received on the
interface, including framing characters.
RO
The number of subnetwork-unicast packets
delivered to a higher-layer protocol.
RO
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
RO
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
RO
The total number of octets transmitted out of the
interface, including framing characters.
RO
The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
RO
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
C-4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents