Radwin 5000 HPMP User Manual page 185

Creating a Sector from a HBS Template
You will of course need to separately configure the participating HSUs. f we connect our three
configured HMUs, we revert to our original sector:

To create a sector from a HBS IP list and a Mobility settings file:
1. In the window of
<IP address> <Read-Write community>
For example,
192.168.10.200 netman
All of the HBSs need to activated and accessible (via a switch) to the managing com-
puter. They need not be on the same sub-net.
Alternatively, enter them one by one using the Plus button.
Any unactivated HBSs will be shown as unavailable:
2. Make any further changes to the displayed list using the Plus/Minus buttons.
3. Click Start to commence the process.
4. The list window will indicate the success or otherwise of the upload for each HBS.
RADWIN 5000 HPMP User Manual
Figure 8-3, enter a HBS list file. The format of the file is lines of
Release 3.3.30
Chapter 8
8-12