Radwin 5000 HPMP User Manual page 111

Registering a fixed HSU for service
The Register button is now enabled.
7. Use the sliders to set uplink and downlink MIR. You may defer this and carry it out
using the HSU Configure option. The MIR acts as a "throttle".
8. Click Register it to complete the process. Here is the result for our example:
Observe that the registered HSU icon LED is now green and that the time slots bar
on the left reflects the proportion of time slots allocated.
9. Repeat steps 1 to 8 for other fixed HSUs. Here is the result for our example:
10.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 5
5-27