Figure 3-23 Beep Sequence For Antenna Alignment - Radwin 5000 HPMP User Manual

Aligning HSUs to a HBS
Figure 3-23: Beep Sequence for antenna alignment
Note
7. Secure the HSU antenna to the pole/wall.
RADWIN 5000 HPMP User Manual
• Three beeps and a pause is 'best signal so far'
• Two beeps and a pause is 'signal quality increased'
• One beep and pause is 'no change in signal'
• Long beep and short pause is 'signal quality decreased'
• One beep and a long pause is 'no air link'
• Any other signal does not relate to antenna alignment
Release 3.3.30
Chapter 3
3-20