Configuring A Nomadic Hsu From The Hbs - Radwin 5000 HPMP User Manual

Configuring a nomadic HSU From the HBS

Change the default HSU IP Address, Subnet mask and Default Gateway as shown:
8. For now, we will leave the remaining fields. Click OK to exit the Configuration win-
dow. You will be offered a cautionary message:
Click Yes. The newly entered parameters for the HSU will be displayed following the
next sync loss/restore to the HSU. You can achieve the same thing by issuing a rest
to the HSU from its context menu.
9. Repeat steps 1 to 8 for one more HSU.
Configuring a nomadic HSU From the HBS

To configure a nomadic HSU from the HBS:
1. Carry out steps 1 to 7 as in the previous section for a fixed HSU.
2. Open the Nomadic tab:
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 5
5-22