Radwin 5000 HPMP User Manual page 143

System
The Auto position means that the Buzzer will give the beeps set out on
installation or upon sync loss.
The Advanced Auto position means that in addition, the buzzer will beep continuously at dif-
ferent rates upon sync loss, antenna mis-alignment and other events for up to two minutes
following restoration of sync.
Recall that the main use of the buzzer tone is for HSU antenna alignment.
The Refresh button restores the current window to its previous state abandoning any
changes you made, provided that you did not click Apply or OK.
We will work through each of the Configuration tabs in turn:
System
Figure 6-14: HSU Configuration window (HBS)
These items are convenience fields. They are typically entered during registration.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 6
page 3-19 during
6-23