Radwin 5000 HPMP User Manual page 167

Telnet Access to the HSU
Table 6-5: HSU Telnet - Set Immediate Commands (Continued)
Command
set writepw <oldpasswd> <passwd>
set trappw <oldpasswd> <passwd>
set buzzer <mode:0=OFF,1=AUTO,2=ON>
set tpc<power:Value between minimal Tx power,
and maximal Tx power>
set name <new name>
set location <new location>
set contact <new contact>
set ethernet <port:LAN1>
<mode:AUTO,10H,10F,100H,100F,DISABLE>
reboot
help
Table 6-6: HSU Telnet - Set Commands requiring Reset
Command
set secId <SectorID>
RADWIN 5000 HPMP User Manual
Explanation
Set the read-write access password (Read-Write Community)
Set the trap Community string
Set the buzzer mode
Set the ODU Tx Power. If a wrong value is entered, both min and max
values shall be displayed in the error reply
Set the name of the link
Set the name of the location
Set the name of the site manager
Set the mode and speed of the Ethernet port
Resets the ODU. The user is warned that the command will reset the
ODU. A new Telnet session to the ODU may be opened after the reset is
complete.
Displays the available commands
Explanation
Set new sector ID - Reset required.
Release 3.3.30
Chapter 6
6-47