Figure 10-9 Radio Frame - Radwin 5000 HPMP User Manual

RFP and HSS
RFP and HSS
When HSS is used, the RFP for the collocated radios must be selected manually.
RADWIN 5000 HPMP radios use the Time Division Duplex (TDD) mechanism.
Under HSS, TDD enables synchronization of transmission for the collocated units as shown in
Figure 10-9:
Figure 10-9: Radio Frame Pattern
Five RFP types (A to E) are available. Under HSS the RFP must be configured by the user
depending on the type of the radio products, services and channel bandwidth in accordance
with the Table 10-3
The tables describe the efficiency of the air interface according to the RFP type, radio prod-
ucts mix, services and channel bandwidth. The tables may also be viewed in the RADWIN
Manager and in the Link Budget Calculator. The efficiency of the air interface will vary accord-
ing to the product used
Table 10-2: Radio Frame Pattern Table - RADWIN 5000 HBS
RFP 5/10/20/40 MHz
TDM Ethernet
E N/A Best fit
Table 10-3: Radio Frame Pattern Table - RADWIN 2000
RFP 40 MHz
TDM Ethernet
B Available Available
E Best fit Best fit
Table 10-4: Radio Frame Pattern Table - WinLink 1000
RPF 20 MHz
TDM Ethernet
A Best fit Best fit
B N/A N/A
C N/A N/A
D N/A N/A
E Available Available
Table 10-5: Legend for Radio Frame Pattern Tables
Item Description
Best fit Optimal RFP choice for TDM and Ethernet services
Available Available RFP for TDM and Ethernet services, but not optima
N/A Service unavailable
RADWIN 5000 HPMP User Manual
and Table 10-4.
.
20 MHz
TDM Ethernet
Available Available
Best fit Best fit
10 MHz
TDM Ethernet
Available Available
Best fit Available
N/A Best fit
N/A N/A
Available Available
Release 3.3.30
10 MHz
TDM Ethernet
Available Available
Best fit Best fit
5 MHz
TDM Ethernet
N/A N/A
Best fit Available
N/A Available
N/A Best fit
N/A N/A
Chapter 10
5 MHz
TDM Ethernet
Best fit Best fit
Available Available
10-7