Radwin 5000 HPMP User Manual page 198

Point to multipoint broadband wireless
Hide thumbs Also See for 5000 HPMP:
Table of Contents

Advertisement

HSU
Figure 9-12: HSU - Performance Monitoring report - Both valid and invalid data (3 of 3)
The HSU report contains many more fields than the HBS. Here is their meaning::
Table 9-3: HSU Performance Monitoring Fields
Abbreviation
Column Heading
Meaning
Integrity
Valid data flag
Date & Time
Time stamp
UAS
Unavailable Seconds
ES
Errored seconds
Severe Errored
SES
Seconds
Background Block
BBE
Error
Min RSL (dBm)
Max RSL (dBm)
RSL Thresh 1 (-88dBm)
RSL Thresh 2 (-88dBm)
Min TSL (dBm)
Max TSL (dBm)
TSL Thresh (25 dBm)
BBER Thresh (1.0%)
Rx MBytes
Received Mbytes
Tx MBytes
Transmitted Mbytes
RADWIN 5000 HPMP User Manual
Description
Green tick for current and valid; Red cross for invalidated data (See example
below). Note that the Performance Monitoring data is not valid if not all the
values were stored (e.g., due to clock changes within the interval or power up
reset)
Data are recorded every 15 minutes; the last 30 days of recordings are
maintained. Roll-over is at midnight
Seconds in which the interface was out of service
The number of seconds in which there was at least one error block.
The number of seconds in which the service quality was low as determined by
the BBER threshold
The number of errored blocks in an interval
The minimum of the receive signal level (measured in dBm)
The maximum of the receive signal level (measured in dBm)
The number of seconds in which the Receive Signal Level (RSL) was below the
specified threshold.
The number of seconds in which the RSL was below the specified threshold.
The minimum of the transmit signal level (measured in dBm)
The maximum of the transmit signal level (measured in dBm)
The number of seconds in which the Transmit Signal Level (TSL) was above
the specified threshold
The number of seconds in which the Background Block Error Ratio (BBER)
exceeded the specified threshold
The number of Megabytes received at the specified port within the interval
The number of Megabytes transmitted at the specified port within the interval.
Release 3.3.30
Chapter 9
9-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents