Radwin 5000 HPMP User Manual page 47

Outdoor Connections
bottom of the cable gland and the end of the CAT-5 cable are covered with the seal-
ing splicing tape and with vinyl plastic tape.
Figure 3-21: Protecting the unit joints with vinyl tape
6. Mount the unit on the pole using the mounting ring as shown in
Ground the unit using the GND screw. For lightning protection, repeat the same pro-
cedure to install the second unit connected to the IDU.
Figure 3-22: Mounted and strapped to the pole
Outdoor Connections

To complete the outdoor connections:
1. Connect the ground cable to the ODU chassis as marked on the ODU.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 3
Figure 3-22.
3-18