Radwin 5000 HPMP User Manual page 92

Configuring the Sector out of the Box - IP Addresses
Figure 5-3: Main window for un-configured HBS ODU
Notice the red icon on the top left corner of the window. It will change to green as soon as
the HBS is configured and activated. Here is the work-flow:
1. Activate the HBS which includes setting its IP address. It will then "see" the deployed HSUs
regardless of their IP address.
2. Configure the HSUs
3. Register the HSUs to the HBS for traffic
4. Complete HSU configuration including HSU Connection Table and any other required fine
tuning.

To activate a HBS:
1. Click the Activate button. The Activation Wizard opens.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 5
5-8