Mounting A Small Form Factor Hsu; Figure 17-7 M - Radwin 5000 HPMP User Manual

Mounting a Small Form Factor HSU

Mounting a Small Form Factor HSU
Using Metal Ties
Figure 17-6: RADWIN 5505 HSU - Rear and metal tie
Thread the mounting ties through the mounting slots provided and mount the unit on a pole.
Using the Mounting Kit Adapter
Mounting Adapter- Bill of Materials
Figure 17-7: Mounting adapter
Table 17-2: Mounting adapter kit for RADWIN 5505 HSU
Item
Description
No.
1 Mounting Kit (as for standard ODU)
2
HSU (Figure 17-6)
3 Mounting adapter (Figure
4 Screw M5x10, CSK, Phillips, stainless steel

To mount the small form factor HSU using a mounting kit:
1. Referring to
using the two screws provided (4). Use a Philips screwdriver set to a torque of 2.0
NM.
RADWIN 5000 HPMP User Manual
17-7)
Figure 17-8 below: Secure the adapter (3) to the rear of the HSU (2)
Release 3.3.30
Quantity
1
1
1
2
Chapter 17
17-4