Radwin 5000 HPMP User Manual page 137

Ethernet Service Configuration
.
An Auto Detect feature is provided, whereby the line speed and duplex mode are detected
automatically using auto-negotiation. Use manual configuration when attached external
equipment does not support auto-negotiation. The default setting is Auto Detect.
The icon next to the CRC error count may be clicked to reset the counter to zero.
You should not reconfigure the port that is used for the managing computer
connection, since a wrong configuration can cause a management
disconnection or Ethernet services interruption.
Caution

To configure the Ethernet Mode:
• In the Ethernet Ports Configuration pane, use the drop-down menu to choose the
required mode.
Transmission Ratio (Tx Ratio, Asymmetric Allocation))
The Transmission Ratio shows the allocation of throughput between downlink and uplink
traffic at the HBS. The Transmission Ratio is not only sector-wide: If you use HSS
10) to collocated several HBSs (to cover adjacent sectors), they must all use the same Trans-
mission Ratio.
Figure 6-10: HBS Collocated client or independent unit
If it is an HSS master, you will see something like this:
Figure 6-11: HBS Collocated master
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 6
(Chapter
6-17