Figure 3-5: External Antennas For Use With Radwin 5000 Hbs - Left: 60° Or 90° Flat External; Right: 120° Integrated - Radwin 5000 HPMP User Manual

External Antenna Package Contents
This ODU has an integrated 370mm (1.2ft) flat panel antenna. The ODU contains both
the radio and the antenna as a single unit housed in a weatherproof case.
• Connectorized ODU
This ODU has 2xN-type connectors for connecting an external antenna
• HSU only - SFF (Connectorized) ODU
The SFF ODU is slightly "fatter" and heavier than a regular connectorized ODU since it
requires extra space for the built-in antenna.
For operation of the RADWIN 5505 HSU under FCC/IC
Regulations:
When operating the device with certain 29 dBi dish antennas, the Tx power
may be no more than 23 dBm in the frequency channel 5845 MHz for 5 and
10 MHz channel bandwidth. Please check with RADWIN Customer Service
Caution
for antenna models subject to this requirement.
All other frequencies may operate using maximum Tx power of 25 dBm.
External Antenna Package Contents
The HBS requires a dual pole sector antenna. HSUs may use any suitable dual pole directional
antenna.
External antennas are available for the RADWIN 5000 HPMP radios, varying in operating fre-
quencies, form factor, size and gain.
Figure 3-5: External Antennas for use with RADWIN 5000 HBS
Right: 120° integrated
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 3
- Left: 60° or 90° flat external;
3-5