Radwin 5000 HPMP User Manual page 127

Management
Trap Destinations
Enter the Trap Destinations. They could include the IP address of the managing computer.
The events log will be stored at the addresses chosen.
VLAN for Management
Management VLAN Configuration
Figure 6-1: VLAN for Management
VLAN IDs are used by RADWIN products in three separate contexts:
Management VLAN, Traffic VLAN and Ethernet Ring. It is recommended that
you use different VLAN IDs for each context.
Caution
VLAN Management enables separation of user traffic from management traffic whenever such
separation is required. It is recommended that each member of a sector be configured with
different VLAN IDs for management traffic. (This reduces your chances of accidentally locking
yourself out of the sector.)

To enable VLAN for management:
1. In the window of
2. Enter a VLAN ID. Its value should be between 2 and 4094.
After entering the VLAN ID, only packets with the specified VLAN ID are processed
for management purposes by the HBS/HSU ODU. This includes all the protocols sup-
ported by the ODU (ICMP, SNMP, Telnet and NTP). Using VLAN for management traf-
fic affects all types of management connections (local, network and over the air).
RADWIN 5000 HPMP User Manual
Figure 6-1, check the Enabled box.
Release 3.3.30
Chapter 6
6-7