Configuring An Hsu From The Hbs Main Window - Radwin 5000 HPMP User Manual

Configuring an HSU from the HBS Main Window

Figure 6-13: HSU Intercommunication - Connection Table
The green shaded squares show intercommunicating elements within the sector. MNG refers
to management traffic which should always be open between HSUs and the HBS. LAN refers
to service traffic between the HBS and the HSUs. As shown, the two HSUs may not communi-
cate between themselves. Clicking the top white square would enable communication (via the
HBS) between them.
You may in fact disable all traffic between the HBS and the HSUs and restore it using this
device.
Configuring an HSU from the HBS Main Window
Right click an HSU for its context menu and click Configure to open the HSU Configuration
window.
Configuration Menu Buttons
The Backup and Restore buttons have the same functionality as the corresponding buttons
for the HBS. They provide for backup and restore of the HSU software.
A backup (full or configuration) may be restored top another HSU provided
that the product IDs and revision levels of the source and target HSUs are
identical.
Note
The Buzzer button may set or mute the buzzer.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 6
6-22