Radwin 5000 HPMP User Manual page 327

Private MIB Parameters
Table C-2: Private MIB Parameters (Sheet 5 of 24)
Name
winlink1000OduAirChannelsOperState
winlink1000OduAirChannelsAvail
winlink1000OduAirChannelsDefaultFreq
winlink1000OduAirDfsState
winlink1000OduAirAutoChannelSelectionState
winlink1000OduAirEnableTxPower
winlink1000OduAirMinTxPower
winlink1000OduAirMaxTxPowerTable
winlink1000OduAirMaxTxPowerEntry
winlink1000OduAirMaxTxPowerIndex
winlink1000OduAirMaxTxPower
winlink1000OduAirChannelBandwidth
winlink1000OduAirChannelBWTable
winlink1000OduAirChannelBWEntry
winlink1000OduAirChannelBWIndex
winlink1000OduAirChannelBWAvail
winlink1000OduAirChannelsAdminState
winlink1000OduAirChannelBWHSSATDDConfli
ctPerCBW
winlink1000OduAirChannelBWMinRatioForSup
porting
winlink1000OduAirChannelBWMaxRatioForSup
porting
winlink1000OduAirRFD
winlink1000OduAirRatesTable
winlink1000OduAirRatesEntry
winlink1000OduAirRatesIndex
winlink1000OduAirRatesAvail
RADWIN 5000 HPMP User Manual
OID
1.3.6.1.4.1.4458.1000.1.5.19
1.3.6.1.4.1.4458.1000.1.5.20
1.3.6.1.4.1.4458.1000.1.5.21
1.3.6.1.4.1.4458.1000.1.5.22
1.3.6.1.4.1.4458.1000.1.5.23.1.1
1.3.6.1.4.1.4458.1000.1.5.23.1.2
1.3.6.1.4.1.4458.1000.1.5.24
1.3.6.1.4.1.4458.1000.1.5.25.1.1
1.3.6.1.4.1.4458.1000.1.5.25.1.2
1.3.6.1.4.1.4458.1000.1.5.25.1.3
1.3.6.1.4.1.4458.1000.1.5.25.1.4
1.3.6.1.4.1.4458.1000.1.5.25.1.5
1.3.6.1.4.1.4458.1000.1.5.25.1.6
1.3.6.1.4.1.4458.1000.1.5.26
Release 3.3.30
Type Description
RW Channel state. Can be set by the user.
Channel Selection uses channels that are
AirChannelsOperState enabled and
AirChannelsAvail enabled.
after link re-synchronization. Valid values: disabled
(0) enabled (1).
Point products.
RO Channel state. Product specific and cannot be
changed by the user.
Selection uses channels that are
AirChannelsOperState enabled and
AirChannelsAvail enabled.
(0) enabled (1).
RO Default channel's availability for all CBWs. The
valid values are: forbidden (0) available (1).
Integer RO Radar detection state. Valid values: disabled (0)
enabled (1).
Integer RO Deprecated parameter. Indicating Automatic
Channel Selection availability at current channel
bandwidth. Valid values: disabled (0) enabled (1).
Integer RO Indicating Transmit power configuration enabled or
disabled.
Integer RO Minimum Transmit power in dBm.
N/A Table of Maximum transmit power per air rate in
dBm.
N/A Maximum Transmit power table entry. INDEX {
winlink1000OduAirMaxTxPowerIndex }
Integer RO Air interface rate index.
Integer RO Maximum Transmit power in dBm.
Integer RW Channel bandwidth in KHz. A change is effective
after reset.
N/A Channel Bandwidths table.
N/A Channel Bandwidth table entry. INDEX {
winlink1000OduAirChannelBWIndex }
Integer RO Channel Bandwidth index.
Integer RO Channel Bandwidth availability product specific.
Options are: Not supported supported with manual
channel selection supported with Automatic
Channel Selection.
DisplayString RO Channels' availability per CBW.
Integer RO Indication for possible Link drop per CBW due to
conflict between HSS and ATDD.
Integer RO Minimal TX ratio that may be used by the HSM and
still enable proper operation of the aforementioned
CBW.
Integer RO Maximal TX ratio that may be used by the HSM and
still enable proper operation of the aforementioned
CBW.
Integer RO Current radio frame duration in microseconds.
N/A Air Rate indexes table for current channel
bandwidth.
N/A Air Rate indexes table entry. INDEX {
winlink1000OduAirRatesIndex }
RO Air Rate index.
RO Air Rate availability depending on air interface
conditions.
Appendix C
Automatic
A change is effective
Rewriteable only in Point-To-
Automatic Channel
Valid values: disabled
C-9