Appendix C Mib Reference; Introduction; Interface Api - Radwin 5000 HPMP User Manual

Introduction

About the MIB
The RADWIN MIB is a set of APIs that enables external applications to control RADWIN
equipment.
The MIB is divided into public and a private API groups:
• Public: RFC-1213 (MIB II) variables, RFC-1214 (MIB II) System and Interfaces sec-
tions
• Private: Controlled by RADWIN and supplements the public group.
This appendix describes the public and private MIB used by RADWIN.
Terminology
The following terms are used in this appendix.
Term Meaning
MIB Management Information Base
API Application Programming Interface
SNMP Simple Network Management Protocol
In addition, the MIB uses internally, the older notions of Local site and Remote site where
this manual would use site A and site B.
To avoid burdening the reader, this appendix will follow the MIB usage.

Interface API

Control Method
The RADWIN Manager application provides all the means to configure and monitor a RADWIN
5000 HPMP link, communicating with the SNMP agent in each ODU. Each SNMP agent con-
RADWIN 5000 HPMP User Manual
MIB Reference
Release 3.3.30
Appendix C
C-1