Radwin 5000 HPMP User Manual page 64

Using the Map View
3. HBS only: The Azimuth and Beam Width determine the sector center-line direction
and angle They are only used for initial default distribution of HSUs on the map.
4. Click OK. The unit is moved to the new location (possibly off-screen).
5. Repeat the previous four steps for each HSU in the sector. If at the end of the pro-
cess, the HBS is off-screen, click the Center on Sector button to "fly" to the sector.
Using the example in
We have located the entire sector to Melbourne, Australia in accordance with our
Radio Plan.
You can make manual location adjustments using the GUI.

To relocate a HBS or HSU using the GUI:
1. Select the unit to move by clicking it. It is surrounded by a brown box.
2. Mouse-over the top edge of the box to get a context button bar as shown in.
RADWIN 5000 HPMP User Manual
Table 4-4, here is the outcome:
Release 3.3.30
Chapter 4
4-14