Radwin 5000 HPMP User Manual page 161

Changing the Sector Band
7. Click OK. A sector re-sync follows. Here is the final result:
Having set the channel bandwidth and operating channels earlier, there is no need
for deactivation and reactivation.
You may also add new Bands by clicking the Add Bands button. There are several provisos to
this:
• Additional Bands must be available for your hardware
• Such additional Bands must be available within the framework of your local regula-
tions
• Acquisition of additional Bands may be subject to payment of a licensing fee to RAD-
WIN Ltd.
The foregoing applies to both regulated and unregulated Bands.
There is no connection between license fees payable to RADWIN for
additional installed Bands (a hardware feature) and license fees payable to
regulatory authorities for the right to use such Bands (a legal imposition).
Note

To obtain and install additional bands:
1. Make a list of ODU serial numbers for all HBSs and all HSUs to receive additional
bands. The list should be a simple text file, one serial number per line. (The serial
numbers are located on the stickers on the ODUs.)
2. As Installer, open the window of
lowing instruction panel is displayed:
RADWIN 5000 HPMP User Manual
Figure 6-18 above, and click Add Bands. The fol-
Release 3.3.30
Chapter 6
6-41