Radwin 5000 HPMP User Manual page 184

Creating a Sector from a HBS Template

To create a sector from a HBS Mobility settings file:
1. Starting with a new HBS and HSUs, log on to the HBS.
2. Activate the HBS in the usual way.
3. Open the Mobility tab in the Configuration window. In the Save / Upload Settings
window, click Upload.
Figure 8-3: Preparing to upload the Mobility file
4. In our case we have one HBS, so it is sufficient to enter the Mobility file as shown
and then click Start. After a few moments, the Status field indicates Done.
The result is as expected:
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 8
8-11