Radwin 5000 HPMP User Manual page 233

Upgrading an Installed Sector
Figure 12-3: Adding a single site for upgrade
Enter the IP address of the site, the Community strings (Default:
man
, respectively) and then click OK. The site will appear in the Software Upgrade
list box. The list can be cleared using the Clear All button.
As an alternative to adding sites one at a time, you can add sites from a prepared list
using the Add from File option in
<IP address>,<Read-Only community>,<Read-Write community>
3. Having created an update list, click Upgrade Package to chose the relevant files.
The default files are located in the SWU subdirectory in the RADWIN Manager instal-
lation area. You may see one or more of the following SWU files:
For RADWIN 5000 HPMP, always choose SWU_5k.swu.
4. You make limited changes to the list by right-clicking any line:
Figure 12-4: Software Upgrade site options
RADWIN 5000 HPMP User Manual
Table 12-1: SWU Files by product
File name Product
SWU_1k.swu WinLink 1000
SWU_2k.swu RADWIN 2000
SWU_5k.swu RADWIN 5000 HPMP
SWD_5k.swu RADWIN 5000 HPMP HSU downgrade
SWU_gs.swu RADWIN GSU
Release 3.3.30
Figure 12-2. The list has the following format:
Chapter 12
public net-
and
12-3