What It Provides; Prerequisites; Special Considerations Working With The Wi - Radwin 5000 HPMP User Manual

Point to multipoint broadband wireless
Hide thumbs Also See for 5000 HPMP:
Table of Contents

Advertisement

What it Provides

What it Provides
The WI is a developing technology. It is possible that the current distributed release may have
additional or slightly different features from those shown here. The description below, should
nevertheless give you a good idea of how to use the WI.

Prerequisites

Hardware
You need a regular LAN connection between a managing computer and one of the sector
ODUs. The WI can be used directly opposite the HBS any of its HSUs. It can also be used over
the air from the HBS to any registered HSU.
The WI is available for RADWIN 2000 C and Airmux-400 L ODUs at release level 2.6.00 or
later along with RADWIN 5000 HPMP ODUs, this release and later.
Software
Your computer should have at least version 6 of MS Internet Explorer. The Web interface also
works with other browsers such as Mozilla Firefox version 3 and later.
Technical Background
You should be familiar with the concepts underlying the RADWIN Manager and preferably
with the Manager itself.

Special Considerations Working with the WI

Advanced Configurations
For setup configurations using features such as HSS, VLAN and QoS, you will need to use the
RADWIN Manager.
Operational Effects
Several WI functions cause temporary sync loss. Typically, changing the number of antennas
falls into this category. These cases will be pointed out in Warning messages.
Some Working Tips
You can:
»
Log on to a ODU on the default IP address of 10.0.0.120/8, set the Link ID and IP
address instead of using the RADWIN Manager as in
Connection method, you need to reset the ODU to see the change in the Web Inter-
face.
»
Change the operating Band of an HSU instead of using the RADWIN Manager as in
Chapter
6. You can revert it the same way or by a direct connection, logged on as
Installer. You cannot change the operating Band of the HBS in this way.
»
Look at Recent Events for either site
You cannot:
»
Change default Tx power
RADWIN 5000 HPMP User Manual
Release 3.3.30
Chapter 21
Chapter
5. Unlike the Local
21-4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents