Figure 4-4 Log On Window Exposing The User Types - Radwin 5000 HPMP User Manual

The RADWIN Manager log-on Concept
Figure 4-4: Log on window exposing the user types.
There are three user types:
Observer
• An
generate reports, but may not change any sector parameters.
Operator
• An
Installer
• An
frequency band (or regulation). The latter function has legal ramifications, requiring
familiarity with local regulations.
If you are connecting through the RNMS server check the RMNS connect button and enter
your server IP address.
The following table summarizes these options:
Table 4-3: User types, default passwords and function
Default
User Type
Password
admin
Observer
admin
Operator
wireless
Installer
The Network Manager should change the default passwords as soon as possible.

Continuing the log-on procedure:
5. If your User Type is not Operator, then choose it now.
6. Enter the password.
RADWIN 5000 HPMP User Manual
has read-only access to the sector. An Observer can monitor the sector,
can install and configure the sector.
can, in addition to functioning as an Operator, also change the operating
Function Community
Monitoring Read-Only
Installation,
Read-Write
configuration
Operator plus
Read-Write
set band
Release 3.3.30
Community
String
public
netman
netman
Chapter 4
4-7