Hub Site Sync [HSS]
Hub Site Sync [HSS]
The External Pulses which might be detected, may come from a collocated HBS, a RADWIN
2000 ODU or a RADWIN GSU configured as Hub Sync Master. To enable HSS, check the
Enabled check box.
Ensure that the correct Operational state is selected - in our example, Hub Site Client -
Continue Tx. Click Apply or OK to enable HSS.
HSS support for RADWIN 5000 HBSs is model dependent
Note
.See
Chapter 10
for further detail about HSS.
RADWIN 5000 HPMP User Manual
Release 3.3.30
Chapter 6
6-5