Registering A Nomadic Hsu For Service - Radwin 5000 HPMP User Manual

Registering a nomadic HSU for service

Registering a nomadic HSU for service
Although we only have one nomadic HSU in our demonstration sector, in practice we would
make provision for a larger number to enable movement between sectors. By way of exam-
ple, we will pre-register three HSU slots to levels A, B and C and time slots to each level as
shown:

To configure nomadic HSUs from the HBS:
1. Open the HBS Configuration window and then its Nomadic Tab:
2.
Figure 5-7: HBS Nomadic Configuration
3. In the Add Devices window, click the Add spin wheel buttons and the time slots
spin-wheels as shown.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 5
5-28