Registering Hmus - Radwin 5000 HPMP User Manual

Registering HMUs

Registering HMUs
Registration of actual HMUs is accomplished by direct connection. You assign each one to one
of the our levels. At the same time, you may configure other parameters such as Air Inter-
face, IP address (though not strictly necessary).

To assign a HMU to a level by direct connection:
1. Log on to a HMU in the usual way. Here is the opening window:
2. Open the Configuration window. Update the system parameters.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 8
8-6