Radwin 5000 HPMP User Manual page 181

Registering HMUs
4. Enter the sector ID (EBGX20561334 in our example) and if necessary, change the
Channel Bandwidth.
5. Open the Tx & Antenna tab and ensure that the antenna type is correct. You may
change any other antenna parameters as well. We set Tx Power for our example to 5
dBm.
6. (Optional) Open the Management tab and set the HSU IP address.
7. Open the Mobility tab. Click the required level. We leave this HSU on A. We will place
our other two HSUs in level B.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 8
8-8