Figure 4-15 Base Station Detail Panel - Radwin 5000 HPMP User Manual

Base Station Panel
form of prioritization between them. Normally you would not leave unallocated time slots
unless you intended to add more HSUs. Every HSU requires at least one time slot.
Base Station Panel
The displayed items in the Base Station panel are straight forward.
Figure 4-15: Base Station detail Panel
The Tx Ratio shows the allocation of throughput between downlink and uplink traffic at the
HBS. Here it is set to 70% downlink and 30% uplink. The Tx Ratio is not only sector-wide: If
you use HSS (Chapter
all use the same Tx Ratio.
The Rx Rate and Tx Rate are the traffic receive and transmit rates through the HBS under
load.
The button bar provides the necessary functionality to configure and manage the HBS.
Table 4-7: HBS Detail Panel button bar functions
Menu
Purpose
Icon
HBS Configuration
Recent Events Log
Performance Monitor
Active Alarms
Spectrum View
RADWIN 5000 HPMP User Manual
10) to collocated several HBSs (to cover adjacent sectors), they must
Reference
Chapter 6
page 9-7
page 9-9
page 9-15
Chapter 20
Release 3.3.30
Chapter 4
4-17