Radwin 5000 HPMP User Manual page 170

Configuration Menu Buttons
In what follows, we configure a registered HSU unless specifically specified otherwise.
Configuration Menu Buttons
The Backup and Restore buttons have the same functionality as the corresponding buttons
for the HBS. They provide for backup and restore of the HSU software.
The Buzzer button may set or mute the buzzer.
Recall that the buzzer tone is primarily used for HSU antenna alignment.
The Refresh button restores the current window to its previous state abandoning any
changes you made, provided that you did not click Apply or OK.
The configuration tabs here differ from the HSU configuration tabs under the HBS Table view
in one respect: There is an Air Interface tab, which varies in functionality, depending on
whether the HSU is registered or not.
RADWIN 5000 HPMP User Manual Release 3.3.30
Chapter 7
7-3