Antennas; Figure 4-3 External Antennas For Use With Radwin 2000+ Series - Radwin 2000+ SERIES User Manual

Antennas

4.3.4 Antennas
The RADWIN 2000 A+, RADWIN 2000 C+, and RADWIN 2000 D+ may be operated with an
integrated antenna that is part of the radio, or with external antennas connected to the radio
via N‐type connectors. The RADWIN 2000i uses external antennas only.
All cables and connections must be connected correctly to reduce RF losses. The required
antenna impedance is 50  ..
Integrated Antennas
• The 5.x GHz Integrated Antenna unit is provided with a 370 mm (1.2ft) flat panel
antenna, with a gain of 23dBi (5.x GHz) / 19dBi (4.9 GHz) and 8° beam width.
• The 2.x GHz Integrated Antenna ODU is provided with 370 mm (1.2ft) flat panel
antenna, with a gain of 16dBi and 16° beam width. The radio and the antenna are
housed in a weatherproof case as a single unit.
External Antennas
External antennas are available for the RADWIN 2000+ Series radios, varying in operating
frequencies, form factor, size and gain, dual or single polarization.
Flat Antenna
Figure 4‐3: External Antennas for use with RADWIN 2000+ Series
See the RADWIN products catalog for a more detailed offering of external antennas.
A typical antenna kit contains ‐
• An antenna
• Two RF cables
• Mounting kit (see also Mounting an External Antenna)
RADWIN 2000+ Series User Manual
Dish Antenna
Release 4.2.40
Mesh Antenna
4‐7