Choose Item Type; Concentrations; Other Measurements; Analog Inputs - Thermo Scientific 48i Instruction Manual

Choose Item Type

Concentrations

Thermo Fisher Scientific
the selected record type that must be committed via the datalogging menu
before the changes will apply. Note that committing any changes to this list
will erase all currently logged data, as the format of the stored data is
changed.
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content.
LREC FIELDS:
>FIELD 1
FIELD 2
FIELD 3
FIELD 4
FIELD 5
FIELD 6
FIELD 7
RANGE AVG
The Choose Item Type submenu displays a list of data that can be loggd
for the current field. Choices are Concentrations, Other Measurements,
and Analog Inputs (if the I/O expansion board is installed).
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content > Field 1-32.
DATA IN SREC FIELD
>CONCENTRATIONS

OTHER MEASUREMENTS

ANALOG INPUTS

RANGE AVG
Note The ANALOG INPUTS item is only displayed if the I/O Expansion
Board option is installed.
The Concentrations screen allows the user to select the output signal that is
tied to the selected field item. The selected item is shown by "<--" after it.
Note that at this point, pressing
changes as opposed to implemented changes. To change the selected record
format and erase record log file data, see
status is visible only in auto range mode.
CO
HICO
INTT
CHT
PRES
SMPLFL
NONE 
DIAGS ALARM
1:
DIAGS ALARM
▲
indicates that these are proposed
"Commit
Model 48i Trace Level-Enhanced Instruction Manual
Operation
Instrument Controls Menu
Content" below. Range
3-27