Concentrations; Corrected Concentrations; Other Measurements; Analog Inputs - Thermo Scientific 48i Instruction Manual

Operation
Instrument Controls Menu

Concentrations

Corrected Concentrations

3-30 Model 48i Instruction Manual
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content > Field 1–32.
DATA IN SREC FIELD
>CONCENTRATIONS
CORRECTED CONCENTRATIONS

OTHER MEASUREMENTS

ANALOG INPUTS

RANGE AVG
The Concentrations screen allows the user to assign one of the
concentrations to the selected record field. The selected item is shown by
"<--" after it. Note that at this point, pressing
proposed changes as opposed to implemented changes. To change the
selected record format and erase record log file data, see
Content" below. Range status is visible only in auto range mode. O2 % is
visible only if the O compensation option is enable.
2
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content > select Field > Concentrations.
CONCENTRATIONS:
>NONE
RANGE STATUS
CO
LO CO
HI CO
RANGE AVG
O2 %
The Corrected Concentrations screen allows the user to select the output
signal that is tied to the selected field item. The selected item is shown by
"<--" after it. Note that at this point, pressing
proposed changes as opposed to implemented changes. To change the
selected record format and erase record log file data, see
Content" below. This screen is only displayed if the O
option is enabled.
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content > select Field > Corrected Concentrations.
1:
DIAGS ALARM
<--
DIAGS ALARM
indicates that these are
"Commit
indicates that these are
"Commit
compensation
2
Thermo Fisher Scientific