measurement. "Set Time/Count" edit the preset time and count.
"Accum. Counts" shows all counts within the measurement time
instead of mean value.
3.1.7
Nuclide table
The submenu Nuclide table is only available in activity mode
(Bq, dps, dpm, Bq/cm²).
3.1.8
Settings
In this submenu it is possible to select between audible single
pulse indication and finder mode. With "Autosend" the RadEye
sends a data string periodically to the infrared port. "Batt.type" is
used to set the correct threshold for warning message "LOW
BATT" for accumulators (NiMH) and primary cells (Alkaline).
With "Alpha Sound" and "Alpha LED" activated each alpha
pulse generates an audible resp. optical indication. With "Set
Date/Time" the user can set the date of the real time clock. "Dis-
play αβ" shows the count rate inclusive α rate. With "Display β"
3-10
DB-070 E
RadEye AB100
Pi/Ff 04.05.2021