Operation Mode; Scaler Parameter; Nuclide Table - Thermo Scientific RadEye GX Operating Instructions Manual

3.1.6

Operation mode

This submenu is used to select between ratemeter and scaler
mode. A "" shows the active configuration.
3.1.7

Scaler parameter

This submenu is used to set the parameters for scaler measure-
ments. Preset TimeMode is used to measure a defined time. Pre-
set CntMode is used to measure a defined number of counts. With
"Auto restart" the RadEye GX restarts automatically the meas-
urement. "Set Time/Count" edit the preset time and count.
3.1.8

Nuclide table

The submenu Nuclide table is only available in activity mode
(Bq, dps, dpm, Bq/cm
3-10
Pi/Ff 14.09.2016
2
). A "" shows the selected nuclide.
DB-074 E RadEye GX, GX-L