Creating Alarms - Thermo Scientific Smart-Vue Installation Manual

Creating alarms

Thermo Fisher Scientific
To set an alarm for a sensor that is configured and working correctly, do the
following, entering your login and password when prompted:
1. Launch Smart-Vue Client on your computer and enter your login
name and password to continue.
2. Select Settings ==> Sensor settings (
3. In the left-hand column, select the sensor for which you wish to
set alarms (e.g., "Temperature").
4. Click on the Alarm settings tab.
5. Set high and low alarm limits and the pre-alarm values.
6. For both high and low alarm conditions, set the delay to wait
before an alarm is sent.
Figure 6. F11 ==> Alarm settings tab for "Temperature" end-point
module
7. Click on Close ==> Yes ==> OK to confirm your changes.
Please see the Thermo Scientific Smart-Vue Software User Manual for more
details on these and other important features. Click on Help ==> User
Manual ( ) to open the PDF file directly.
Software configuration
), or press F11.
Smart-Vue Wireless Siren Installation Guide
Click on
up/down
arrows to set.
Toggle
button(
to activate/
deactivate
12