Status And Alarms - Thermo Scientific 48iQ Instruction Manual

Operation
Settings

Status and Alarms

3-44 48iQ Instruction Manual
The Status and Alarms screen provides information with respect to module
alarms. In each screen, instrument readings, setpoints, and low/high alarm
values are displayed. If applicable, setpoints and alarms are also settable
from the Settings>Instrument Settings screen.
Note This symbol denotes there is an active alarm in the module.
Home Screen>Settings>Health Check>Status and Alarms
The Status and Alarms menu contains the following information:
Concentration: Displays CO concentrations and alarms.
●
NDIR Bench: Displays bench module alarms and faults.
●
O Sensor: Displays O
●
2
enabled).
Flow and Pressure: Displays flow and pressure alarms and faults.
●
Peripherals Support: Displays peripherals support alarms and faults.
●
Valve and Pump Resets: User can reset valve and pump power.
●
Analog Input/Output: Displays analog input/output alarms and faults.
●
Digital Input/Output: Displays digital input/output alarms and faults.
●
Serial Numbers: Displays all the serial numbers for the instrument.
●
concentrations, sensor alarms and faults (if
2
▲
Thermo Scientific