Status And Alarms - Thermo Scientific 43iQTL Instruction Manual

Status and Alarms

Thermo Scientific
The Status and Alarms screen provides information with respect to module
alarms. In each screen, instrument readings, setpoints, and low/high alarm
values are displayed. If applicable, setpoints and alarms are also settable
from the Settings>Instrument Settings screen.
Note
This symbol denotes there is an active alarm in the module.
Home Screen>Settings>Health Check>Status and Alarms
The Status and Alarms screen contains the following information:
Concentration: Displays SO
G
pass/fail status.
SO Bench: Displays bench module alarms and faults.
G 2
Perm Oven: Displays (optional) perm oven module alarms and faults.
G
Flow and Pressure: Displays flow and pressure alarms and faults.
G
Peripherals Support: Displays peripherals support alarms and faults.
G
Valve and Pump Resets: User can reset valve and pump power.
G
Analog I/O: Displays analog input/output alarms and faults.
G
Digital I/O: Displays digital input/output alarms and faults.
G
Serial Numbers: Displays all the serial numbers for the instrument.
G
concentrations, alarms, and calibration
2
43iQTL Instruction Manual
Operation
Settings
L
3-35