Assembly And Disassembly; Detaching And Refitting The Dp Original Feed Belt And Dp Forwarding Pulley - Olivetti DP-700 Service Manual

3JX
1-5-2

Assembly and Disassembly

(1) Detaching and refitting the DP original feed belt and DP forwarding pulley

Follow the procedure below to replace the DP original feed belt and DP forwarding pulley.
Procedure
1. Open the top cover.
2. Remove two original feed belt shaft guides.
3. Remove the stop ring and then remove the
original feed unit from the DP.
4. Remove the original feed belt unit from the
inserted parts of the original feed unit.
1-5-2
Top cover
Original feed belt unit
Service Manual
Original feed belt shaft guides
Figure 1-5-1
Original feed unit
Figure 1-5-2
Original feed unit
Figure 1-5-3
Stop ring
Y106871-5