Detaching And Refitting The Dp Separation Pad - Olivetti DP-670 Service Manual

(2) Detaching and refitting the DP separation pad

Follow the procedure below to clean or replace the DP separation pad.
Procedure
1. Remove the DP feed pulley unit. (see page
1-5-2)
2. Push the inserted parts of the DP separation
pad and then remove the DP separation
pad.
3. Clean or replace the DP separation pad.
Refit all the removed parts.
Y108671-9
DP separation pad
Inserted part
Service Manual
DP separation pad
Inserted part
Figure 1-5-4
3K5
1-5-5