Laying Of Cables When Replacing The Height Adjustment Motor - Sirona GALILEOS Service Manual

9 Repair
9.2 Height adjustment motor (M1_4)/spindle
298
9.2.4 Laying of cables when replacing the height adjustment
motor
1. Plug connector X2 (O) into board DX32.

Laying of cables when replacing the height adjustment motor

2. Connect the protective ground wire (P) and lay it as shown in the
photo.
Sirona Dental Systems GmbH
Service Manual GALILEOS
61 25 665 D3437
D3437.076.01.15.02 06.2012