EMC DL3D 1500 Administrator's Manual page 98

Configuring and Managing Disk Backup
Configuring a Windows domain
Joining a Windows workgroup
98 EMC DL3D 1500 and DL3D 3000 Administrator's Guide
• Map the CIFS share to a drive in Windows Explorer. See
"Mapping CIFS shares" on page
Use the Windows Domain section to configure the Windows domain
information.
Note: Make sure that your system has the date and time set correctly and is
synchronized with your domain controller.
1. Click Windows Domain to configure the Windows domain
information.
The Windows Domain page appears.
2. Edit the Windows Domain information to join a workgroup or an
Active Directory domain.
The Windows Domain information is divided into the following
sections:
Joining a Windows Workgroup
Joining a Windows Domain
Joining a Domain using a Domain User Credential
Troubleshooting ADS Join Issues
To join a Windows workgroup:
1. Edit the page information as follows:
a. Domain Type - Select the workgroup.
b. Domain/Workgroup Name - Type the workgroup name. This
can be the name of an existing workgroup or a new
workgroup (for example, Workgroup or Sales).
2. Click Apply.
Note: When a Samba server is joined to a workgroup, the share security is
managed directly from the remote management pages. For a CIFS share,
security is provided through the read only or read/write access to the share.
By default, when a CIFS share is created the default security setting allows
access for all users. Further access restrictions on individual users can be
managed from the following page: NAS > Shares > Edit.
225.